Super Wide Infrared Control Miniature Size RC Helicopter

This RC Helicopter is with super wide infrared control.It's miniature size and light weight with unique material. it's designed with very auto stable and precision speed tri-band technology.

Features:
* Miniature size
* Light weight
* Auto stable
* Battery requirement for small butterflyrfly
(via Super Wide Infrared Control Miniature Size RC Helicopter @ Hobby-Estore.com $27.8)

2CH Radio Control Electric RC Airplane Giant Yellow Bee RTF

The transmitter has simple 2-channel proportional joystick controls with trims. The left stick controls the throttle and the right stick controls the tail flaps for turning. It's kind of like driving a car except the faster you go, the higher you climb! The control range is 1500' to give you plenty of margin Ready-To-Fly right out of the box. All you need to provide is 8 AA batteries for the transmitter. The parkflyer comes complete with RTF airplane with motor, receiver, throttle speed controller and servo installed. Flight battery pack and AC charger are also included.

Wing Span: 1050mm
Overall Length: 770mm
Flying Weight: 330g
Battery: NI-MH 7.2V/600MAH
Power System: 2PCS 180 MOTOR
RC Contrlo System: 2 channel digit programing
Box Size:81.5X28X62.5CM
(via 2CH Radio Control Electric RC Airplane Giant Yellow Bee RTF @ Hobby-Estore.com $32.6)

2 Channel Winner Radio Control Helicopter RTF

This electric r/c helicopter is the best quality beginner mini r/c helicopter in the market. The construction is very sturdy and hovers extremely well. It can move up and down and at the same time spin its tail Left & right and is great for beginners and experts. This r/c helicopter will keep you amazed. Perfect for ages 8-80.

The RC Helicopter features Proportional Control, Altitude & Rotor Speed Control, Flight Stabilizing System, & Lightweight Airframe. Comes with remote control assembled and ready to fly out of the box! Fly outside or in your very own living room!
(via 2 Channel Winner Radio Control Helicopter RTF @ Hobby-Estore.com $39.5)

Kyosho F16 FIGHTING FALCON DF55 Electric RC Airplane ARF

Heralded as the real pilot's fighter jet, the F16 Fighting Falcon was designed to be small, fast and lethal without all the bells and whistles of much larger US fighters. The superior visibility from the cockpit, the advanced radar systems, and the close-range weapon systems make this the ideal fighter for air-to-air combat. Placed in service in January 1979, the Fighting Falcon still fights along side the F22 and F117 Air Force fighters today. This legendary aircraft is captured in scale detail and matching performance, as Kyosho's first DF55 brushless ducted fan RC jet.

The new DF55 is a brushless ducted fan unit with an impellor diameter of 55mm, which is 10mm larger than the popular DF45.It's installed in a hybrid foam fuselage that sets new standards for scale appearance and durability. The airframe can handle the higher loads that result from the exceptional performance of the bigger ducted fan while remaining incredibly light. The F16 is factory assembled with the brushless motor, micro servos and brushless speed control installed! All you need to do is install a LiPo battery pack and a receiver of your choice, and you're ready to fly one of the most high-performance ducted fan jets available.
(via Kyosho F16 FIGHTING FALCON DF55 Electric RC Airplane ARF @ Hobby-Estore.com $189)

Esky 4Ch RAH-66 Co-Comanche CoAxial Electric RC Helicopter RTF(Camouflage)

RAH-66 "CO-COMANCHE" is a new helicopter being used for reconnaissance mission of arming and light assault for the land forces."CO-COMANCHE" was designed by TWF as a 4CH helicopter with co-axial, double rotor blades system, it is easy to fly with simple operation, which possesses the characteristics of high sensitivity and flexible turning of the real helicopter.

It was designed with divided canopy and fuselage connecting by a carbon fibre rod, which is practical and beautiful. There are three sliding wheels in the landing strut, which can slide automatically while taking off and landing. The ornamental tail rotor adopts duct rotor blade that can rotate automatically while flying the helicopter, which brings you into a real flight state and brings more fun for your flight. ESKY original softdog is included in the packing, installing the FMS software of the disc, and connecting the simulator port in the transmitter to the computer, you can enjoy your flight in the computer then!
(via Esky 4Ch RAH-66 Co-Comanche CoAxial Electric RC Helicopter RTF(Camouflage) @ Hobby-Estore.com $89.9)

1:10 Scale 2WD Traxxas Monster Truck NITRO STAMPEDE TRA4109

The Nitro Stampede builds on the legendary ruggedness and performance that has made the Stampede name synonymous with monster truck fun. When you're ready to go faster and run longer, nitro power is the next step. Nitro Stampede combines TRX Pro.15 Nitro Power with tall, drive-over-anything ground clearance for hour after hour of intense wheelie- popping, rock-crushing action. Just fuel it, start it, and drive it! Traxxas makes it easy for Nitro Stampede to feed your hunger for brutal, rock-spitting, dirt-chewing horsepower.

The Nitro Stampede now comes equipped with mirror-chrome All-Star 2.8 wheels wrapped with pre-glued Talon all-terrain tires. The smooth-running Revo-Spec Talon tread pattern provides incredible grip on hard-packed surfaces, tears through rocks and gravel, and kicks up giant roosts of dirt off-road. Performance-tuned foam inserts provide extra stability. The all-new body design sports an aggressive stance and tough new graphics that tell the world this truck is serious about its mission. New gray-molded parts tastefully compliment the look of the chassis. Pound-for-pound, Nitro Stampede is one of the meanest, toughest, and best-looking R/C monster trucks ever created. Nitro Stampede will easily earn its place as your first choice for exciting, wheelie-popping nitro action.
(via 1:10 Scale 2WD Traxxas Monster Truck NITRO STAMPEDE TRA4109 @ Hobby-Estore.com $289)

3CH Radio Control Electric RC Airplane J3 Cub Grasshopper RTF

Assembly is a snap! With no tools required, you can be up and flying within minutes of opening the box!

The 3-channel two-stick transmitter allows you to control up down, left-right and power set tings and because it's electric, you can fly where gas airplanes are not allowed. A comprehensive owners manual guides you through step by step to final assembly and pre-flight checks.

It uses one rechargeable NiMH battery pack (included) and an automatic DC peak battery charger.

The J3 CUB - get airborne today!

The J3 CUB 3 Channel has successfully trained thousands of newbie radio controlled pilots worldwide. You'll be flying within minutes of receiving this fully built airplane enjoying over 12 minute flight times on a single charge thanks to our new improved NiMH battery and ball bearing gear drive system. Equipped with a powerful variable speed electric motor, which starts with a push of a button, the J3 CUB is capable of take-offs from the ground with its huge powerful motor and wide wingspan.

This aircraft operates as both a motorized glider and a plane. The huge wingspan in combination with lightweight construction and the powerful Mabuchi type motor provide terrific lift.
(via 3CH Radio Control Electric RC Airplane J3 Cub Grasshopper RTF @ Hobby-Estore.com $68.5)

Kyosho EXTRA 300S EP 10071B RC Airplane

Fly this stunning acrobatic airplane, supercharged with brushless motor technology! The SQS Series lets you get flying fast.

The maestro of the acrobatic airplane world and winner of multiple world championships is ready to light up the sky again in the form of KYOSHO's electrifying EXTRA 300S owered by brushless motor technology. The EXTRA's beautiful lines are recreated in a lightweight fuselage with stringer structure. Easily adjusted elevator system maximizes the benefits of electric power for exciting acro flight performance. And it comes almost completely pre-assembled with the balsa structure expertly pre-covered in film. In short time you can feel the excitement and thrills of a true acrobat in action!
(via Kyosho EXTRA 300S EP 10071B RC Airplane @ Hobby-Estore.com $159.9)

2CH Syma V3 Lama Coaxial Radio Remote Control RC Electric Helicopter RTF w/ LED Head Light

The New SYMA V3 LAMA CO-AXIAL 2 Channel Twin Blade Helicopter. It is the best quality and best flying twin blade helicopter on the market. Not to be confused with the toy twin blade helis, long lasting lithium battery. This is the V3 which is the latest model with many improvements and upgrades. Twin blade helicopters can been flown by anyone with minimum practice and are a great way to get into the hobby. Cushioned Landing Gear Technology For A Softer Landing. You can have all the fun and thrills of flying a proper RC helicopter but without the hours of practice. Excellent for beginners & Pro's, There are many twin blade helicopters on the market now but the Lama V3 is in a league of it's own with much better performance and agility. Complete Kit, Ready to Fly, only required 8 AA batteries for the transmitter to start flying)
(via 2CH Syma V3 Lama Coaxial Radio Remote Control RC Electric Helicopter RTF w/ LED Head Light @ Hobby-Estore.com $33.8)

4CH Electric RC Airplane-T34 Scale Radio Control Airplane RTF

T-34 SCALE 4CH R/C ELECTRIC AIRPLANE". The T-34 Mentor was the U.S, military's primary trainer in the 1950s and widely used in U.S. Navy and Air Force.There are many kind of improved T-34 Mentor. This T-34 Mentor model is made according to improved one. It is designed as a perfect transition trainer for beginner to control radio airplanes.Full 4 channels control.An Electron Speed Controller. 3 Servos on the Aileron, Elevator and Rudder. Flat bottom airfoil and large wing area to weight ratio make it has ex cellent stability and acrobatics performance. The body of the plane is made up by foam material. The T-34 is Ready To Fly RTF.
(via 4CH Electric RC Airplane-T34 Scale Radio Control Airplane RTF @ Hobby-Estore.com $104.8)

Kyosho Spree Sports M36 Electric RC Airplane ARF

The Spree Sports M36 is an inexpensive electric powered fun model from Kyosho. All major components are pre built and covered with a gloss white and colorful blue and gold trim. The fiberglass cowl is painted to match and includes the smoked canopy. A double ball bearing gear drive unit provides the sturdy mount for the 540 long can brush motor. The EP propeller and spinner are also supplied in this ARF kit. The sturdy wire landing gear and wheels will handle those rough landings and the Spree Sport M36 will look great in the air for any pilot level. The full length ailerons, rudder, and elevator wil provide plenty of input for those crisp manuevers.
(via Kyosho Spree Sports M36 Electric RC Airplane ARF @ Hobby-Estore.com $134.9)

Supper 1:8 Scale SPEED Nitro Gas 4WD Radio Control RC Buggy Car Bazooka

The R/C 1:8 SCALE NITRO GAS 4WD RACING OFF-ROAD RACING BUGGY FROM "HI SPEED"BAZOOKA WITH SH21 JAPAN ENGINE ,EQUIPPED WITH SINGLE SPEED TRANSMISSION AND A SNAWA BLAZER SPORT QUALITY WHEEL RADIO SYSTEM AND DURABLE LEXAN BODY WHICH IS MORE RESIST TO CRASH THAN PVC BODY!!!

1/8 SCALE RADIO CONTROLLED .21 ENGINE 4WD OFF-ROAD RACING BUGGY "BA ZOO KA" IS BROTHER OF KYOSHO MP 7.5 SAME KYOSHO FACTORY PRODUCTION, DIFFERENT BRAND "HI SPEED" SO 98% PARTS CAN USE IN MP7.5

THIS BABY RUNS OVER 80MPH OFF-ROAD ON NITRO-FUEL GAS!
(via Supper 1:8 Scale SPEED Nitro Gas 4WD Radio Control RC Buggy Car Bazooka @ Hobby-Estore.com $348.6)

1:10 Radio Remote Control RC Nitro Gas RC Truck 4WD On Road

Competition Racing Remote Control Truck, Complete Kit with Body & Engine! READY-TO-RACE OUT OF THE BOX !!! * NEW IN A BOX * GREAT CHRISTMAS AND BIRTHDAY GIFT !!!

Available now from Smartech Racing is our Nitro Gas truck! This is an FULLY assembled kit complete w/ radio for racers who like to race and burn out of the box. The brand new kit comes with a kick-ass engine which has a built-in high flow header pipe for incredible top speed!

This Nitro gas rc truck contains all available hop-up parts; body or engine included!!! Designed to compete in national and local competitions, manufactured at a super-modern facility, Smartech's nitro r/c gas trucks are created with a mind for high performance racing. This 4-Wheel-Driven Gas Powered Truck is a 1/10th scale that combines many sophisticated performance-enhancing features that represent a culmination of the long years of Smartech's design experience.
(via 1:10 Radio Remote Control RC Nitro Gas RC Truck 4WD On Road @ Hobby-Estore.com $196.5)

T-REX 450S Electric RC Helicoper Unassembled Kit + New 430L3550 Brushless Motor+30A ESC

T-REX 450S (eCCPM) helicopter is great for 3D flight and wind resistance, the main frames are made by high strength light aluminum alloy and carbon fiber materail, suitable for 3D Acrobatics.

This kit is for the flyers who want uncompromised performance and quality. This SE arrived with 80% pre-assembled!
1mm CNC aluminum alloy main frames features the rigidity and great for 3D flight.
Aluminum alloy battery mounting plate is fixed to aluminum alloy mounting plate mount for connecting to main frames. Set the battery here and make the center of gravity close to the rotor blade sides for reducing the trim when the heli rolling.
CNC Main rotor housing is made by hard aluminum alloy material.
Using Ball and Hiller two systems mixing control. Through simple structure of Ball control system, power-saving of Hiller system and CCPM control, can simultaneously control 3 servo for AILE, EVLE, PIT 3 actions. This CCPM control system is great for 3D flying control and extending life cycle of servos.
New streamlined carbon tail rotor blades makes the gyro more efficient.
New design for Tail pitch assembly, upgrade to ball control slider bushing with dual bearing, add collars to ball links for reducing the gaps, maks the change of pitch travel more smooth.
Using new design on tail rudder control rod and control guide for smooth control, the design is same as TREX 600.
Providing flybar weight- When normal flying, you can add the weights on flybar paddles for stable flight. When aerobatic flying, you don't need to add the weight, but you can see the flexibility of 3D actions

New gear ratio(4.24:1), suitable for the motor with higher KV, provide more safty.
Using super strength drive belt and tail drive gear, features wear resistant to reduce power loss.
All kit use stainless steel linkage ball, wear resistance, anti-oxidization.
Tail rotor hub made of stainless steel, very rigid.
Use33pcs precision bearing.
Great stable and sensitive mixing lever design! Can disply the great stability and precision for 3D flight.
Special adjustable pitch system, hold rotation system, tail rotor drive belt system! It is a work of great originality for helicopter!
(via T-REX 450S Electric RC Helicoper Unassembled Kit + New 430L3550 Brushless Motor+30A ESC @ Hobby-Estore.com $238.5)

High Quality 7.4V 1800mAh Lithium-Polymer Battery

Charging Lithium Polymer batteries with incorrect charger WILL CAUSE FIRE, AND EXPLOSION.
Please make sure your charger supports Lithium Polymer batteries.
The battery must be charged by the appropriative charger or that we recommend.
We are NOT responsible for any damage caused by incorrect charging of Lithium Polymer.
Battery charging safety protocol: http://www.hobby-estore.com/battery-charge-safety.html
(via High Quality 7.4V 1800mAh Lithium-Polymer Battery @ Hobby-Estore.com $19.6)

Nitro Gas 1:10 Scale Smartech Radio Control 2speed RC Cars Winner PRO

Smartech Gas RC Car, which includes the High-Torque powerful 15CXPRO racing engine, is the perfect choice for hobbyist looking for a Fast Ready-To-Run. This Nitro Gas 1/10 Radio Remote Control 2Speed Bentz Car XPro Engine-RTR comes standard with a lightweight, adjustable two-speed transmission for speeds up to 50MPH. All SMARTECH gas cars come standard with Painted and Decaled bodies to get you on track faster with less hassle. This Nitro Gas 1/10 Radio Remote Control 2Speed Bentz RC Car XPro Engine-RTR includes the two-channel curvilinear functioned transmit remote system with easy-reach fine trim and easy-access front panel, and two servos and one receiver to keep you in control. Get fun outdoors with this 1/10 2speed nitro radio remote control ready to run Bentz gas rc car!
(via Nitro Gas 1:10 Scale Smartech Radio Control 2speed RC Cars Winner PRO @ Hobby-Estore.com $208.5)

Esky 4Ch RAH-66 Co-Comanche CoAxial Electric RC Helicopter RTF(Camouflage)

Esky 4Ch RAH-66 Co-Comanche CoAxial Electric RC Helicopter RTF(Camouflage) Price:$89.9

RAH-66 "CO-COMANCHE" is a new helicopter being used for reconnaissance mission of arming and light assault for the land forces."CO-COMANCHE" was designed by TWF as a 4CH helicopter with co-axial, double rotor blades system, it is easy to fly with simple operation, which possesses the characteristics of high sensitivity and flexible turning of the real helicopter. It was designed with divided canopy and fuselage connecting by a carbon fibre rod, which is practical and beautiful. There are three sliding wheels in the landing strut, which can slide automatically while taking off and landing. The ornamental tail rotor adopts duct rotor blade that can rotate automatically while flying the helicopter, which brings you into a real flight state and brings more fun for your flight. ESKY original softdog is included in the packing, installing the FMS software of the disc, and connecting the simulator port in the transmitter to the computer, you can enjoy your flight in the computer then! only at hobby-estore.com

1:10 Scale Kyosho Lazer ZX5 30076B Electric Car Kit

The Lazer ZX5 is the culmination of Kyosho's 15 years of experience with Electric 4WD off road cars. The Lazer was designed from the ground up as an off road electric buggy, not a 4WD on road sedan with longer arms and shocks. The shaft drive chassis is designed to promote weight balance left to right as well as the proper front to rear balance. The built in slipper clutch helps to smooth out the choppy tracks and helps damp harsh inputs to the drive train to keep it running run after run. Up front there are three options, ball differential, one-way and spool, plus you can use a center one-way on the drive shaft as well.

The ZX5 also comes stock with a rear sway bar and Kyosho's Twin-Cap Pro Shock for easy maintenance and threaded bodies make for a silky smooth suspension. Overall the Lazer ZX-5 is a race bred, competition 4WD electric buggy that is sure to put you at the head of the pack.

(via 1:10 Scale Kyosho Lazer ZX5 30076B Electric Car Kit @ Hobby-eStore.com $329.90)

2CH DH9083 Radio Remote Controlled Helicopter RTF(White)

2CH EP Radio Remote Controlled Helicopter RTF is fully assembled with all pre-flight adjustments completed. Simply remove it from the box, charge and insert the batteries, and get ready to take-off. The package is equipped with everything needed to get airborne (except 8AA transmitter batteries). It is very easy to fly, and is suitable for any level of RC Helicopter modelers. Now everyone can enjoy the freedom of flight! Be Hurry!

(via 2CH DH9083 Radio Remote Controlled Helicopter RTF(White) @ Hobby-eStore.com $37.9)

1:10 Scale 4WD On-Road Traxxas Sedan NITRO 4-TEC 3.3 TRA4809 Package

It's the fastest, and most-powerful Ready-To-Race model ever created, the 70+mph Nitro 4-Tec 3.3. Combine the Extreme Power of the TRX 3.3 Racing Engine with an asphalt- hugging, lightweight chassis, and a raging fury of wickedly fast acceleration and supersonic speed is unleashed. Peg the throttle and all four tires claw for traction as Nitro 4-Tec 3.3 re-writes the record books and breaks through the 70mph barrier. In the asphalt jungle, Nitro 4-Tec 3.3 is the reigning king. Nitro 4-Tec 3.3 didn't take any shortcuts to the top. The TRX 3.3 Racing Engine delivers peak horsepower with a factory-installed performance-tuned aluminum pipe that's been beautifully blue-anodized and laser etched. New precision hex hardware adds high-tech

flair and makes servicing easy. The new ball-bearing equipped bellcrank steering system tightens the response for expert handling. The efficient 3-belt drive system has been enhanced for the extra speed and power with larger pulleys and a wider rear belt.

Nitro 4-Tec has hot new look with complex, innovative body graphics that reflect the style and speed of the underlying chassis. New grey parts and white powder-coated springs brighten the chassis and make it easier to appreciate the detailed engineering that makes it all work. The 2.0 Mesh wheels offer classic styling that withstands the test of time. Of course, the most exciting appearance feature is the sight of the giant TRX 3.3 machined cooling head thrusting itself above the body. The look of power is unmistakable.

(via 1:10 Scale 4WD On-Road Traxxas Sedan NITRO 4-TEC 3.3 TRA4809 Package @ Hobby-eStore.com $399.90)